|
Quattro Laser Processing Machine |
|
|
|
Dec 16, 2008 at 06:00 PM |
Quattro Standard Features
The Quattro Laser 1,000W (2,000W option) Processing Machine is a completely new design combining the latest developments in machine, Computer Numerical Control and laser resonator technologies.
- Compact Design - Flying optics laser with integrated structure (Oscillator, power supply, computer numerical control and processing table).
- 1000 watt laser source can cut up to 0.250” carbon steel and up to 0.500” carbon steel with optional 2000 watt laser.
- Lower running cost and maintenance cost - Standard nozzle: 1.5mm/dia. (consumption of assist gas is 50% of standard 2mm nozzle). Electric power consumption 39kVA.
- Easy to operate - Flying optics with cantilever: access from Front or either side. Simple operation panel.
- High performance / cost ratio - Simple Design (one piece construction of frame and table) processes most commonly used materials.
Technical Specifications
| MOTION PACKAGE |
| Travel method |
X-, and Y- axis : Optics travel |
| Control method |
X-, Y-, and Z- axis controlled (Three axis simultaneously controlled) |
| Travel amount |
X = 49.6"
Y = 49.6"
Z = 3.9" with 5” lens 1.5” with 7.5” lens (2kW only) |
| Feed rate |
X = 393" / min
Y = 393" / min |
| Rapid rate |
X = 1,181" / min
Y = 1,181" / min
Z = 590" / min |
| Maximum worksheet loading capacity |
176 lb |
| Repeatable Positioning accuracy |
±0.0004" / 20” |
| Least command increment |
0.0001 |
| Drive feed method |
Ball screw |
| Assist gas type selector |
Automatic selection |
| Machine table height |
33.5" |
| Total machine weight (including cooling unit and dust collector) |
8,488 lbs |
| Power supply (only for machine) |
AC, 3-phases, 200-220V, 7kVA |
| Air Supply (only for machine and when the shop- air assisted cutting is used) |
0.5 Mpa (72 psi or 5 kgf/cm2), 250 L/min (8.9 ft3/min) |
| CNC CONTROLLER |
| CNC unit |
FS160i-LA (FANUC) |
| CNC control method |
Semi-closed loop method |
| Control functions |
X-, Y-, and Z-axis controlled (simultaneously controlled)
Laser oscillator control |
| Input methods |
3.5" FD (built-in type)
Manual data input with numeric keys |
| Least input increment |
0.0001 |
| Minimum position detection accuracy |
0.0001 |
| Program storage capacity |
126kB |
| Operating modes |
Edit / Memory / MDI / Retract / Manual |
| Display functions |
Program directory
Cutting conditions
Position information
Parameters
Messages
Tool diameter compensation (Offset)
Program check
Diagnosis (CNC self-diagnostics)
Settings |
| I/O interface |
RS232C |
| Display |
9.5" monochrome display |
|
|
Last Updated ( Feb 01, 2009 at 09:55 AM )
|
